0800 769 254

1F/16A Link Drive, Wairau Valley, Auckland 0627

View with appointment

Stainless Steel Facts

29/08/2020 Royal Glass Ltd 0

 

Stainless Steel Facts

What is Stainless Steel
Stainless Steel is a metal alloy made up by mixing steel with other elements to make it corrosion resistant. Iron mixed with Carbon is used to produce the steel then chromium, nickel, molybdenum, silicon, aluminium are all added in various percentages. Chromium is the main element used to help make it corrosion resistant.

FQA on our stainless steel 

Will Stainless Steel Rust? Stainless steel will not rust like a car where the metal flakes out and leaves a hole. The chemicals added to the steel will eliminate this from happening. Stainless Steel can however stain if the correct grade and finish are not used for a particular application. The higher the grade and the shinier the finish the longer it will last and stay looking new. We recommend using a mirror finish in a marine environment or around swimming pools.
Is Stainless Steel Chrome Plated? No. it is a chemical mix of metals. It is then polished to a mirror or chrome like finish.
Is Stainless Steel just a coating over mild steel? No. Stainless steel is a solid material. If you drill through it you will find the same metal all the way through.
Is Stainless Steel Magnetic? Yes and no. A very obscure answer. As a general rule higher grades of stainless are not magnetic however if they are worked for example folded (bent) or heated to a high enough temperature the molecules are changed and it can become magnetic.
I thought all Stainless Was shiny?  Stainless Steel starts out as a dull grey metal and is polished to the shiny or brushed finish

If you are in close proximity to a marine environment or a swimming pool we recommend either using 316 or 2205 stainless in a mirror finish.

Stainless Steel Grades

Although there are many grades of stainless steel available. There are only 3 common grades used when installing glass products.

Grade ‘304’ is a general purpose stainless and is the most common grade of stainless produced. It is made up of at least 18% chromium and 8% nickel offering good corrosion resistance. 304 stainless steel is best suited for indoor use and is inadequate for many marine applications.

Grade ‘316’ offers the best corrosion resistance among standard stainless steel and is often referred to as “marine grade”. 316 stainless is made up of at least 16% chromium and 10% nickel. 2% molybdenum is also added to 316 stainless to increase its corrosion resistance. Grade 316 is most suited to outdoor and marine applications.

Grade 2205 Duplex is the newest grade we have seen come on the market. It has a very high resistance to corrosion. 2205 Duplex stainless is made up of at least 22% chromium and 5% nickel, 3% molybdenum is also added. 2205 Stainless has a higher strength than 316 and 304 grades so is often used in a marine environment where strength is important. Stainless Steel 2205 has a far superior corrosion resistance properties and strength than SS316 grade. This extra strength and corrosion resistance comes from the elevated levels of chromium, molybdenum and nitrogen. It gets its name ‘duplex stainless steel’ as its micro structure is essentially half ferrite and half austenite.

 

Stainless Steel Finishes
Although there are many different finishes available we only supply two finishes.

 

Mirror Finsih (also referred to as polished)
A mirror finish is when the stainless is polished to a finish that is brigh in colour and shows a reflection. A mirror finish is achieved by polishing up to 600grit or above. A very high mirror finish is achieved by polishing up to 2000 grit.

Satin
A Satin finish is a dull finish where if you look closely you will often see fine scratch lines around the stainless. It is achieved by stopping the polishing process at 240 grit.

How is stainless steel polished/finished?

Stainless Steel is polished by using a series of tools and materials that manipulate the surface similar to sanding a piece of timber. You start by making harsh scratches and slowly make the scratches finer and finer. The process involves sanding then buffing while slowly decreasing the harshness of the material being used.

Polishing stainless steel requires specialised tools and skills.

0/5 (0 Reviews)

Leave a Reply

Your email address will not be published. Required fields are marked *

CALL ME
+
Call me!
Royal Glass